These are our most popular farm duty blowers with many additional options available to make them commercial duty. Both blowers boast a 10″X30″ diameter close tolerance, 4 blade fan with large easy turning chutes to handle the large volume of snow you will be putting through it.
On the 84-S, we use 5/16″ re-inforced end-plates while the 96-S gets 7/16″. These blowers come standard with hydraulic hood turner assembly’s and optional single or double auger (one 20″ or two 16″) to ensure that no snow gets left behind!
Technical Specifications:
CUTTING WIDTH
AUGER
FAN
WEIGHT (LBS)
HOOD
84″ Single
20″
10″ X 30″
965
Hyd. Orbital
84″ Double
16″ & 16″
10″ X 30″
1120
Hyd. Orbital
96" Single
20"
10" x 30"
1025
Hyd. Orbital
96" Double
16"
10" x 30"
1220
Hyd. Orbital
Product Options:
Hydraulic back drag option
12 Volt Actuator
The 12 volt actuator can be used when hydraulic control is not an option.
This options allows smooth operation with internal controls.
Cylinder & Hoses
Cylinder & Hoses NOT included when hydraulic hood is standard on snowblowers.
This option is the most durable and reliable method of controlling your hood rotation or deflection when hydraulics are available.
Adjustable Linkage (Dummy Cylinder)
This option is for use with the flex hood option when hydraulics are not available.
Weld On Cutting Edge
Our weld on cutting edge has mild steel wear bars, stitch welded to the wearing surfaces on the under side of the snowblower.
Bolt On Cutting Edge
Our bolt on cutting edge is a hardened bevelled bar, that is bolted to the wearing surfaces on the under side of the snowblower.
Adjustable Skid Shoes
The adjustable skid shoes allow you to adjust the cutting depth of the snowblower. This is typically used for softer or uneven surfaces.
Wing Edges
Wing edges extend and re-inforce the end plates of the snowblower for better bank cutting ability!