location_pin Get Directions
647 Welham Road Unit 15, Barrie, L4N 0B7
ID # 13335426

Smyth Skid Steer Mount Hydraulic (Industrial)

Call for Price
Overview
 (72-SH Model Shown)
Smyth’s skid steer mount hydraulic driven snowblowers are available with many options to fit on a wide variety of equipment. Our common sizes are 66”, 72” & 78” with many options available. To maximize the blower’s performance, we have a wide variety of hydraulic motors to accommodate to your specifications. Regular flow ranges from 14 to 24 gallon per minute, and High flow ranges from 25 to 40 gallons per minute.
The quick-attach hook-up is mounted directly to the back of the fan housing, and braced to all four corners of the blower for extra rigidity.
CUTTING
WIDTH
AUGER
FAN
WEIGHT
(LBS)
66"
16"
8 x 24
585 lbs
72"
16"
8 x 24
615 lbs
78"
16"
8 x 24
650 lbs
 Product Options

Orbital Motor Hood Turner

Benefits of ordering this option with your snowblower, is the 270 degree hood rotation!

12 Volt Motor Hood Turner

This option includes a 12 volt actuator, and has a 270 degree hood rotation. This is a great option for when hydraulics are not available.

Hydraulic Hood Turner Kit (Cable Operated)

This option is the most economical way to get power hood rotation.

Cylinder & Hoses or 12 Volt Actuator option available.

Flex Hood

Picture 172 1%28rev%201%29 0

Our flex hood option gives you full control of snow discharge, which can be a very important option to have when you are blowing snow into tight spaces.

12 Volt Actuator

The 12 volt actuator can be used when hydraulic control is not an option.

This options allows smooth operation with internal controls.

Cylinder & Hoses

Cylinder & Hoses NOT included when hydraulic hood is standard on snowblowers.

This option is the most durable and reliable method of controlling your hood rotation or deflection when hydraulics are available.

Adjustable Linkage (Dummy Cylinder)

This option is for use with the flex hood option when hydraulics are not available.

Bolt On Cutting Edge

Our bolt on cutting edge is a hardened bevelled bar, that is bolted to the wearing surfaces on the under side of the snowblower.

Weld On Cutting Edge

Our weld on cutting edge has mild steel wear bars, stitch welded to the wearing surfaces on the under side of the snowblower.

Adjustable Skid Shoes

The adjustable skid shoes allow you to adjust the cutting depth of the snowblower. This is typically used for softer or uneven surfaces.

Wing Edges

Wing edges extend and re-inforce the end plates of the snowblower for better bank cutting ability!

Truck Loading Chute

Our truck loading chute option is a great option to have if you are loading dump trucks, as it gives extended reach for loading!

 

Specifications
Model
Skid Steer Mount Hydraulic (Industrial)
Category Name
Industrial
Year
2015
Sale Type
New
Manufacturer
Smyth
Documents